
Your well is out of sight, but it should never be out of mind. The underground casing, liner, and screen that deliver water to your home or property are subject to wear, corrosion, and shifting geology — and none of that is visible from the surface. A borehole video inspection changes that. It puts eyes inside the well so you can see exactly what is happening and make decisions based on facts, not guesswork.
If you own property in Plant City and rely on a private well, this guide walks you through the entire process — from asking the right questions before you schedule, to understanding what the footage reveals, to acting on the findings confidently.
What a Video Well Inspection Actually Does
A well camera inspection involves lowering a waterproof, high-resolution camera down the full depth of your well. The camera records continuous footage as it travels, capturing the condition of the casing walls, joints, the pump and drop pipe, and the screen at the bottom. The footage is reviewed in real time and recorded for later reference.
This is not a routine step most well owners think about — until something goes wrong. But a well condition assessment done proactively can catch problems before they become expensive emergencies. In Plant City, where wells commonly draw from the Floridan Aquifer through porous limestone formations, the camera can reveal issues that are unique to this region: sediment accumulation, mineral encrustation from hard water, sand intrusion through a compromised screen, or casing damage from shifting ground.
Step 1: Know When to Request an Inspection
Not every well needs a camera inspection on a fixed schedule, but certain signs make it a smart next move. Consider scheduling a Plant City well inspection if you notice any of the following:
- A sudden drop in water pressure or flow rate
- Sand, grit, or sediment appearing in your water
- Changes in water color, odor, or taste — including a sulfur smell common in some parts of Hillsborough County
- The well is more than 10 years old and has never been inspected internally
- You recently purchased the property and have no inspection records
- Your area experienced a significant storm or flooding event, which can introduce surface contaminants into the well
- Your pump is running more frequently or cycling irregularly
Florida’s wet season, which runs roughly June through September, brings heavy rainfall and potential flooding. After major weather events, a well camera inspection is one of the most reliable ways to confirm the casing seal is intact and that surface water has not infiltrated the well bore.
Step 2: Ask These Questions Before You Schedule
Before confirming an appointment, ask the service provider a few direct questions. These help you get the most useful inspection possible.
What depth will the camera reach?
Make sure the camera system can reach the full depth of your well. Shallow inspections miss the screen and lower casing sections where many problems originate.
Will I receive a recorded copy of the footage?
A professional video well inspection should always include a copy of the footage — either as a digital file or a link to a cloud recording. You need this for your records and for any future contractor who works on the well.
Will someone explain the findings to me during the visit?
Real-time walkthrough of the footage is valuable. You should be able to ask questions as the camera is pulled back up and the technician reviews what was found.
Is the camera rated for my well diameter?
Well diameters vary. Confirm the camera equipment is compatible with your specific casing size to ensure accurate footage without gaps.
Step 3: Prepare Your Property Before the Technician Arrives
A little preparation makes the inspection go smoothly. Clear the area around the wellhead of any debris, landscaping, or equipment. Locate your well records if you have them — original drilling report, previous inspection results, pump installation dates. If you do not have these on hand, that is okay. A skilled technician can still complete the inspection, and the footage itself will reveal much of what you need to know.
Let the technician know about any recent changes in water quality or pump behavior. That context helps them know where to focus attention during the footage review.
Step 4: Understand What the Footage Shows
Once the camera is lowered and the recording begins, here is what to look for in each section of the well:
Upper Casing (Near the Surface)
This section should look clean and structurally intact. Look for cracks, gaps at the casing joints, or signs of corrosion. Damage here is a serious concern because it creates a pathway for surface water and contaminants to enter the well.
Mid-Casing Section
This area may show mineral buildup — white or orange deposits — which is common in Florida’s limestone aquifer environment. Moderate buildup is manageable. Heavy encrustation can reduce flow and is worth addressing.
Lower Casing and Screen
This is the most critical zone. The screen filters the water entering the well from the aquifer. Look for torn or collapsed screen sections, visible sand accumulation, or debris. Sand intrusion is a frequent finding in Plant City area wells and can accelerate pump wear if left unaddressed.
Pump and Drop Pipe
The camera will also capture the condition of your submersible pump and the drop pipe connecting it to the surface. Corrosion, mechanical wear, or misalignment here can explain pressure problems and may warrant a closer look by a water pump repair technician.
Step 5: Use the Findings to Make a Decision
The inspection report and footage give you a foundation for action. Not every finding requires immediate repair. Here is how to think through the results:
- Minor mineral buildup: Monitor and consider a well cleaning on your next service visit.
- Casing crack or gap: This is a higher-priority repair. A compromised casing can allow surface contamination into your water supply.
- Screen damage or sand intrusion: Depending on severity, this may call for screen replacement or pump protection measures.
- Pump wear or corrosion: Compare the camera findings against your pump’s age and performance history to determine whether repair or replacement is the right path.
If you are unsure how to weigh the findings, ask for a written summary from the technician. A good inspection partner will tell you what needs attention now, what can be monitored, and what is simply normal for a well of your age and local geology.
Why Plant City Well Owners Benefit From Routine Inspections
Plant City sits in an active agricultural corridor with significant groundwater use. The combination of sandy soils, proximity to the Alafia River watershed, and Florida’s intense seasonal rainfall creates conditions where wells can change meaningfully from year to year. A periodic well condition assessment — even every three to five years — gives you a current picture of what is happening underground so nothing catches you off guard.
The team at Accurate Drilling Solutions in Plant City provides video well inspections for residential, commercial, and agricultural properties throughout the area. With deep experience in Florida’s aquifer systems and the specific challenges that affect Hillsborough County wells, the Accurate Drilling Solutions team can walk you through findings in plain language and recommend only what your well actually needs.
To schedule a video well inspection for your Plant City property, call 813-643-6161. You can also reach out through the contact page to get started.
Frequently Asked Questions
How long does a video well inspection take?
Most residential well camera inspections take between one and two hours, depending on the depth of the well and the complexity of what the camera reveals. Deeper wells or those with significant buildup or obstructions may take a bit longer. The technician will review the footage with you on-site, which is included in that time.
Does the well need to be shut down during the inspection?
In most cases, yes. The pump is typically pulled or shut off so the camera can travel the full depth of the casing without obstruction. Your technician will coordinate this process and restore the system before leaving. Downtime is usually minimal and limited to the duration of the inspection itself.
Can a video inspection tell me if my well water is safe to drink?
A borehole video inspection assesses the physical condition of the well — casing integrity, screen condition, sediment, and structural issues. It does not test for bacteria, nitrates, or chemical contaminants. For a full picture of water safety, pair the camera inspection with a laboratory water quality test. Many well service providers can coordinate both.
What is the difference between a video well inspection and a standard well service call?
A standard service call typically addresses a specific symptom — low pressure, a pump issue, or unusual water quality. A video inspection goes deeper by documenting the entire interior of the well visually. It is a diagnostic tool rather than a repair service, and its findings often guide the repair decisions that follow.
How often should Plant City well owners schedule a video inspection?
There is no single universal answer, but many well professionals recommend an interior inspection every three to five years for active residential wells. Wells that are older, have a history of sand intrusion, or are located in areas with heavy agricultural activity nearby may benefit from more frequent inspections. Your technician can recommend a schedule based on your well’s specific history and condition.
Will the camera footage show if my casing has been affected by nearby construction or ground movement?
Yes. Ground shifting, nearby drilling activity, or significant weather events can cause casing joints to separate or crack. The camera will capture any visible displacement, gaps, or structural changes in the casing wall. This is one of the more important reasons to schedule an inspection after major construction or storm activity near your property.
continue reading
Related Posts
With the rainy season winding down and groundwater levels stabilizing, fall is one of the best times to plan a well pump installation in Dade City. Learn why November timing works in your favor, what Pasco County's geology means for your system, and how to know when replacement makes more sense than repair.
Not sure what happens during an irrigation well service appointment? This guide walks Wesley Chapel homeowners through every stage — from the initial call to post-visit follow-up — so there are no surprises. Know what to prepare, what the technician checks, and what comes next.
If your irrigation well in Spring Hill is losing pressure or falling behind demand, the cause could be pump wear, sand intrusion, a clogged screen, or aquifer yield decline. This guide walks through the symptoms of each problem so you know what you're dealing with before it gets worse.



